TSA 160 NT
TSA 160 NT Invers * Swing door system for automatically opening and closing 1-leaf swing doors
- Drive opens the door with the spring when power is off
- Opening and closing speed can be individually adjusted
- Hydraulic latching action which accelerates the door shortly before the closed position
- Inverse function opens the doors via spring force and closes them with a motorised function
- Obstacle detection detects obstacles through contact and stops the opening or closing process
- Automatic reversing detects an obstacle and returns to the opening position
- Push & Go function triggers the automatic drive components following light manual pressure on the door leaf
- Drive can be used with roller guide rail or link arm
- Integrated back check, slows down doors that are thrown open forcefully
Swing door system for automatically opening and closing 1-leaf swing doors
Application Areas
- Smoke and heat extraction fresh air opening systems
- Doors along escape and rescue routes
- Single and double leaf right and left single-action doors
- Single-action doors up to 2800 mm hinge clearance, 1400 mm leaf width or 250 kg weight
- Minimum hinge clearance 1500 mm, minimum width of the passive leaf 400 mm
- Interior and exterior doors with high access frequency
- Symmetrical and asymmetrical division of door possible
- Transom installation
Product specifications
| TSA 160 NT Invers | |
| Reveal depth (max.) | 400 mm |
| Door overlap (max.) | 20 mm |
| Drive type | Electrohydraulic |
| Opening angle (max.) | 115 ° |
| DIN left | Yes |
| DIN right | Yes |
| Installation in the door leaf | No |
| Installation in the door frame | No |
| Transom installation opposite hinge side with link arm | Yes |
| Transom installation opposite hinge side with roller guide rail | No |
| Transom installation hinge side with roller guide rail | Yes |
| Door leaf installation opposite hinge side with roller guide rail | No |
| Door leaf installation hinge side with roller guide rail | No |
| Door leaf installation hinge side with link arm | No |
| Mechanical latching action | Yes |
| Electrical latching action | No |
| Electrical closing sequence control | No |
| Mechanical closing sequence control | No |
| IP rating | IP20 |
| Mode of operation | Automatic, Off, Permanently open, Shop closing, Night |
| Automatic function | Yes |
| Low-energy function | No |
| function smart swing | No |
| Servo function | No |
| Inverse function (opening by spring force) | Yes |
| Obstacle detection | Yes |
| Automatic reversing | No |
| Push & Go | adjustable |
| Operation | Programme switch DPS, Programme switch integrated in the drive, Programme switch MPS |
| Suitability for fire protection doors | No |
| Integrated smoke switch | No |
Downloads
Variants & Accessories
* Notice about the products displayed
The products mentioned above may vary in form, type, characteristics and function (design, dimensions, availability, approvals, standards etc.) depending on the country. For questions please contact your GEZE contact person or send us an E-Mail.