Powerturn IS/TS * Semi-automatic system with swing door drive on active leaf and door closer on passive leaf
- Smart swing function for easy manual door opening
- Closing force of EN4-7 with variable adjustment
- Opening and closing speed can be adapted individually on the active leaf
- Mechanical latching action which accelerates the door shortly before the closed position
- Mechanical closing sequence control holds the active leaf in the waiting position until the passive leaf is closed
- Low-energy function opens the door with reduced speed, fulfilling the highest safety requirements
- Obstacle detection detects an object through contact and stops the opening or closing process
- Automatic reversing detects an obstacle and returns to the opening or closing position
- Push & Go function triggers the automatic drive components following manual door handle activation
- System available for use with roller guide rail or link arm
- Optional radio reception board for wireless activation by radio transmitter
Application Areas
- Right and left double leaf single-action doors
- Single-action doors up to 3200 mm hinge clearance with link arm installation
- Single-action doors up to 3000 mm hinge clearance with roller guide rail installation
- Minimum hinge clearance 1270 mm, minimum passive leaf width 470 mm (depending on installation type)
- Interior and exterior doors with high access frequency
- Symmetrical and asymmetrical division of door possible
- Transom installation hinge and opposite hinge side
Installation situations in reference objects and videos
Automatic door drive Powerturn IS/TS
Semi-automatic system with swing door drive on the active leaf and door closer on the passive leaf with built-in mechanical latching action that accelerates the door just before reaching the closed position and obstacle detection. © Jürgen Pollak / GEZE GmbH
Opera House Dubai
Opera House Dubai, Powerturn © Nicolas Thome / GEZE GmbH
Technical data
| Powerturn IS/TS | |
| Height | 70 mm |
| Depth | 130 mm |
| Leaf weight (max.) 1-leaf | 600 kg |
| Distance centre door hinge-drive axis (min.-max.) 2-leaf, link arm | 1270 mm - 3200 mm |
| Distance centre door hinge-drive axis (min.-max.) 2-leaf, roller guide rail | 1380 mm - 3000 mm |
| Leaf width (min.-max.) | 470 mm - 1600 mm |
| Reveal depth (max.) | 160 mm |
| Drive type | Electromechanical |
| Spring pre-load | EN1 - EN7 |
| DIN left | Yes |
| DIN right | Yes |
| Transom installation opposite hinge side with link arm | Yes |
| Transom installation hinge side with roller guide rail | Yes |
| Mechanical latching action | Yes |
| Mechanical closing sequence control | Yes |
| Disconnection from mains | Main switch in the drive |
| Activation delay (max.) | 10 s |
| Operating voltage | 230 V |
| Power rating | 200 W |
| Power supply for external consumers (24 V DC) | 1200 mA |
| Service temperature | -15 - 50 °C |
| IP rating | IP30 |
| Mode of operation | Automatic, Night, Permanently open, Shop closing, Off |
| Type of function | Fully automatic |
| Automatic function | Yes |
| Low-energy function | Yes |
| function smart swing | Yes |
| Key function | Yes |
| Vestibule function | Yes |
| Obstacle detection | Yes |
| Automatic reversing | Yes |
| Push & Go | adjustable |
| Operation | GEZEconnects (PC + Bluetooth), Service terminal ST 220, Programme switch DPS |
| Parameter setting | GEZEconnects (PC + Bluetooth), Service terminal ST 220 |
| Standard conformity | DIN 18650, EN 1158, EN 16005 |
Downloads
LABELLING OBLIGATION: © Jürgen Pollak / GEZE GmbH
LABELLING OBLIGATION: © Nicolas Thome / GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
Variants & Accessories
* Notice about the products displayed
The products mentioned above may vary in form, type, characteristics and function (design, dimensions, availability, approvals, standards etc.) depending on the country. For questions please contact your GEZE contact person or send us an E-Mail .