Automatic door drive

Slimdrive EMD * Electromechanical swing door drive with only 7 cm height for single leaf doors up to 180 kg

  • Opening and closing speed can be individually adjusted
  • Electrical latching action which accelerates the door shortly before the closed position
  • Low-energy function opens and closes the door with reduced speed, fulfilling the highest safety requirements
  • Vestibule function controls the opening and closing of two consecutive doors (interlocking door system)
  • Obstacle detection detects obstacles through contact and stops the opening or closing process
  • Automatic reversing detects an obstacle and returns to the opening position
Show more
  • Push & Go function triggers the automatic drive components following light manual pressure on the door leaf
  • Drive can be used with roller guide rail or link arm
Contact us

Electromechanical swing door drive with only 7 cm height for single leaf doors up to 180 kg

Quiet, electromechanical drive system with a construction height of just 7 cm for 1-leaf swing doors.

Application Areas

  • Right and left single leaf single-action doors
  • Single-action doors up to 1400 mm leaf width and 180 kg weight
  • Interior and exterior doors with high access frequency
  • Door leaf installation and transom installation

Product specifications

Slimdrive EMD
Leaf weight (max.) 1-leaf 180 kg
Leaf width (min.-max.) 750 mm - 1400 mm
Reveal depth (max.) 400 mm
Door overlap (max.) 50 mm
Drive type Electromechanical
Opening angle (max.) 135 °
DIN left Yes
DIN right Yes
Installation in the door leaf No
Installation in the door frame No
Transom installation opposite hinge side with link arm Yes
Transom installation opposite hinge side with roller guide rail Yes
Transom installation hinge side with roller guide rail Yes
Door leaf installation opposite hinge side with roller guide rail No
Door leaf installation hinge side with roller guide rail Yes
Door leaf installation hinge side with link arm No
Mechanical latching action No
Electrical latching action Yes
Electrical closing sequence control No
Mechanical closing sequence control No
Disconnection from mains Cable plug connection
Activation delay (max.) 20 s
Operating voltage 230 V
Frequency of supply voltage 50 Hz
Power rating 230 W
Power supply for external devices 1000 mA
Temperature range -15 °C - 50 °C
Air humidity non-condensing (max.) 95 %
IP rating IP20
Modes of operation Automatic, Permanently open, Night, Off, Shop closing
Automatic function Yes
Low-energy function Yes
function smart swing No
Servo function No
Inverse function (opening by spring force) No
Obstacle detection Yes
Automatic reversing Yes
Push & Go adjustable
Operation Programme switch integrated in the drive, Programme switch DPS, Programme switch MPS
Parameter setting ST 220 service terminal, Programme switch DPS, GEZEconnects (PC + Bluetooth)
CAN interface Optional
Approvals EN 16005, DIN 18650
For fire resistance doors No
Integrated smoke switch No

Downloads

Variants & Accessories

Contact

GEZE Central +34-902-194-036 GEZE Service +34-902-327-430