Automatic door drive

Slimdrive EMD Invers * Electromechanical swing door system for single leaf smoke and heat extraction fresh air opening systems

  • Opening and closing speed can be individually adjusted
  • Electrical latching action which accelerates the door shortly before the closed position
  • Drive can be used with roller guide rail or link arm
  • Inverse function opens the door via spring force and closes it with a motorised function
  • Vestibule function controls the opening and closing of two consecutive doors (interlocking door system)
  • Obstacle detection detects obstacles through contact and stops the opening or closing process
Show more
  • Automatic reversing detects an obstacle and returns to the opening position
  • Push & Go function triggers the automatic drive components following light manual pressure on the door leaf
Contact us

Electromechanical swing door system for single leaf smoke and heat extraction fresh air opening systems

Application Areas

  • Doors along escape and rescue routes
  • Right and left single leaf single-action doors
  • Single-action doors up to 1400 mm leaf width or 230 kg weight
  • Smoke and heat extraction fresh air opening systems
  • Interior and exterior doors with high access frequency
  • Door leaf installation and transom installation

Product specifications

Slimdrive EMD Invers
Leaf weight (max.) 230 kg
Leaf width (min.-max.) 750 mm - 1400 mm
Reveal depth (max.) 400 mm
Door overlap (max.) 50 mm
Drive type Electromechanical
Opening angle (max.) 130 °
DIN left Yes
DIN right Yes
Installation in the door leaf No
Installation in the door frame No
Transom installation opposite hinge side with link arm Yes
Transom installation opposite hinge side with roller guide rail Yes
Transom installation hinge side with roller guide rail Yes
Door leaf installation opposite hinge side with roller guide rail No
Door leaf installation hinge side with roller guide rail Yes
Door leaf installation hinge side with link arm No
Mechanical latching action No
Electrical latching action Yes
Electrical closing sequence control No
Mechanical closing sequence control No
Disconnection from mains Cable plug connection
Activation delay (max.) 20 s
Type of installation 230 V
Frequency of supply voltage 50 Hz
Power rating 230 W
Power supply for external consumers (24 V DC) 1000 mA
Temperature range -15 °C - 50 °C
Air humidity non-condensing (max.) 95 %
Temperature range IP20
Modes of operation Automatic, Permanently open, Night, Off, Shop closing
Automatic function Yes
Low-energy function Yes
Smart swing No
Servo function No
Inverse function (opening by spring force) Yes
Obstacle detection Yes
Automatic reversing Yes
Push & Go adjustable
Operation Programme switch integrated in the drive, Programme switch DPS, Programme switch MPS
Parameter setting ST 220 service terminal, Programme switch DPS, GEZEconnects (PC + Bluetooth)
CAN interface Optional
Approvals EN 16005, DIN 18650
Suitability for fire protection doors No
Integrated smoke switch No

Downloads

Variants & Accessories

Contact

GEZE Central +34-902-194-036 GEZE Service +34-902-327-430